News Flash Home
The original item was published from 9/13/2022 6:02:55 PM to 10/1/2022 12:00:04 AM.

News Flash

Public Works/Road Work

Posted on: September 13, 2022

[ARCHIVED] Hydrant flushing across city now through end of September

Yellow fire hydrant with grass and sidewalk around it

City Water crews have started the annual fire hydrant flushing program during overnight hours. 

Crews started Sunday night, Sept. 11. They expect to finish this year’s flushing within about two weeks, before the end of September. Crews are flushing hydrants overnight, Monday through Friday, between 10 p.m. and 6 a.m.  

You can generally expect to see our crews move through the city in this order: 

  • Phase 1 – Pennfield and low-pressure areas – generally from North Avenue east nearly to McAlister, and beyond Pennbrook to the north, south to about Michigan Avenue (tan and gray-blue sections of the attached map) 
  • Phase 2 – low-pressure area – generally the Central Business District/downtown, Michigan Avenue south to just south of Columbia Avenue (gray-blue section on map) 
  • Phase 3 – low-pressure area – generally Urbandale, west of North Avenue not quite to Collier, and from Harmonia Road north to just north of Morgan Road (gray-blue section on map) 
  • Phase 4 – high-pressure area – Fort Custer Industrial Park area northwest of Springfield, south along Hill Brady Road and Skyline Drive, from the south border of Springfield to around Columbia Avenue, and southwest to I-94 (rust section on map) 
  • Phase 5 – high-pressure area – generally south of Columbia Avenue to Beckley Road, and further south around Capital Avenue SW and M-66, east to and north/south on Beadle Lake Road (rust section on map) 
  • Phase 6 – Gethings and Beadle Lake areas – square area around Gethings and Stone Jug roads, streets between Columbia and Golden avenues, and south on Beadle Lake Road past I-94 (green and purple sections on map) 

The flushing process often results in cloudy or discolored water; please be mindful of this while doing laundry or other tasks that could be affected. We do what we can to limit this, and the water always is safe during the process. Discolored or rusty water may be present in the area where crews are flushing, as well as in neighboring areas. If you see discolored water from your taps, we recommend that you run the cold water in your home or business. 

You might see water pressure changes while we flush, but those should be brief. We do not shut off water during this process, and boil water advisories are not necessary. If you do lose water pressure for a long period, or completely, check your aerators first. If the problem continues, please call us at 269-966-3506, option 2. After 4 p.m. or on the weekend you can reach water crews at 269-966-3493. 

This information will be posted on our website, Check out the City Spotlight section at the bottom of the home page. Staff will update the website daily with maps of flushing progress across the city. 

Flushing hydrants and water mains provides several benefits to our water system users. Regular flushing provides water of the highest quality to our customers. It also allows our crews to verify that our water system is operating properly, and identify areas that require repair and/or maintenance. It also ensures that fire hydrants are ready for use should the Fire Department need them. 

We appreciate everyone’s patience as we maintain our city’s infrastructure.  

See progress maps and more information
Facebook Twitter Email

Other News in Public Works/Road Work